Timeguard PDFM362 Manuel d'utilisateur télécharger pdf

3.1 Select the required location

3.1.1 Sensor adjustment

Fig. 2 shows the way coverage alters with ceiling height and with

adjustments of the METER dial setting.

Section 4.2.3 shows how tilting and rotating the sensor can produce

different fields of coverage.

Ceiling Height (H) Detection Coverage Diameter (D)

with METER on +

2m 7m

2.5m 7m

3m 10m

3.5m 12m

4m 12m

4.5m 12m

If the METER control is turned to – the coverage diameter is

substantially reduced.

We do not recommend the use of these units with ceiling heights

greater than 4.5m.

3.1.2 Helpful tips for installation

As the sensor responds to temperature change or moving heat sources,

please avoid the following conditions:

•Avoidhighlyreflectivesurfaceswithinthedetectionrange.

•Avoidmovableobjectse.g.curtainsandplantsinthedetectionrange

(these may cause erroneous detections when moved by air flow from

fans or air conditioner).

•Avoidheatsources(e.g.heatingvents,radiators,airconditioners

and filament lamps) in detection range.

•Avoidfansdrawingairacrossthesensorlens.

3.3 Installation procedure

3.3.1 To install the detector, cut a hole with diameter of 65mm in the

ceiling board and bring the power cable through the hole. Strip off

cable sheath and core insulation according to Fig. 6.

3.3.2 Unscrew protection covers on power box with a cross point

screwdriver. The RJ11 socket (use sensor A only) is for sensor connection

and screw terminals are for power and load(s). (See Fig. 7).

1 Package Contents

2 Product Description

3 Installation and Wiring

Visual I.D.

Item Sensor Power Unit Instructions IR10

(optional

purchase)

Quantity 1 1 1

Technical Specifications

Rated Voltage: 230V ~ ±10% 50Hz

Loads: PDFM362:

Load I (L

) for Lighting: µ contact gap

Mains halogen lamp: max. 1000W

Incandescent lamp: max. 2000W

LV halogen lamp: max. 600VA

Fluorescent lamp: max. 900VA/100µF

LED lamp: max 400W

Load II (D1-D2) for HVAC:

Voltage free contacts:

Max. 5A for 250V AC~ or 30V DC (resistive)

Motor: 1/10HP (approx. 73W)

PDFM361:

Load I (L

) for Lighting: µ contact gap

Incandescent lamp: max. 2000W

Mains halogen lamp: max. 1000W

LV halogen lamp: max. 600VA

Fluorescent lamp: max. 900VA/100µF

LED lamp: max 400W

Delay Time Adjustment: PDFM362:

TIME1 (for lighting):

Adjustable from 5 sec. to 20 min.

(continuously adjustable)

Extendable to 30 min. and 60. min when

in use with the IR10 remote control

TIME2 (for HVAC):

Continuously adjustable from 10 sec. to

60 min. (independent of light level)

PDFM361:

TIME: Adjustable from 5 sec. to 20 min.

(continuously adjustable)

Extendable to 30 min. and 60 min. when

in use with the IR10 remote control

LUX (light level) Adjustable from 10 LUX to 2000 LUX

Adjustment: (continuously adjustable)

Max. Detection Coverage: 360º cone shape from ceiling height of

2.5m giving 7m dia. coverage at floor

level (for affect of ceiling height on

coverage see section 3.1.1)

Conforms To

EC Directives

All procedures indicated in this manual must be

carried out by a professional installer.

METER Adjustment: Adjustable continuously from +

giving maximum detection

coverage at floor level to –

giving substantially reduced

detection coverage at floor level

Connection between 1m flying lead from sensor

Sensor and Power Unit: terminated in an RJ11 plug.

RJ11 socket on power unit

(use socket A for PDFM362)

Operating Temperature: 0ºC to +45ºC

Environmental Protection: Sensor: IP40

Power unit: IP20

Fig. 1-A

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 1-B

Side View Top View (showing individual

beam pattern at floor level)

Drill a hole 65mm dia.

in the ceiling.

3.2.2 One load is controlled by two sensors (see Fig. 4).

3.2.3 PDFM361 for one sensor (see Fig. 5).

Fig. 7

Flush Mount

Presence Detector

PDFM362/PDFM361

Instructions

2.1 Features

The PDFM362 PDFM361 controller is a ceiling flush mount

presence detector for indoor applications in commercial and

domestic locations. PDFM361 covers lighting applications only,

whereas PDFM362 can control lighting and HVAC

(heating, ventilating and air conditioning) applications.

Adjustment of Time and LUX value can be made either by the dial

controls on the sensor body or by the IR10 Infrared remote control.

•PDFM362hastworelaysforoutputsloadIandloadII:

load I is for lighting control and load II has voltage free contacts

for HVAC control which operate at all LUX (light) levels.

•Automaticallyadjuststofitinawiderangeofceilingthicknesses.

•Thesensorhasaveryhighdensityofsensitivebeamscoveringthe

detection area. These are evenly distributed ensuring no dead spots

and detection of the smallest movements.

•RJ11plugandsocketforquickandeasyconnection.

•BuiltinLEDinsensorgivingconfirmationofremotecontrolsettings

and easy test operation.

2.2 Dimension (see Fig. 1-A & Fig. 1-B)

Sensor: 80 dia. x 52mm

Power unit: 124 x 58 x 37.6mm

Models PDFM362 PDFM361

3.2 Wiring diagrams

3.2.1 PDFM362 controller (see Fig. 3).

Please disconnect power completely and read the

entire instruction manual carefully before installation.

PDFM362 – 6A breaker

A circuit breaker (250VAC,6A) type C according to EN60898-1

of load shall be installed in the fixed wiring for protection of load II.

PDFM361, PDFM362 – 10A breaker

A circuit breaker (250VAC,10A) type C according to EN60898-1

of load shall be installed in the fixed wiring for protection of load I.

This product must be

protected by a fuse or

circuit breaker with a

maximum rating of

10A or lower.

1 2

Résumé du contenu

Page 1 - Installation and Wiring

3.1 Select the required location3.1.1 Sensor adjustmentFig. 2 shows the way coverage alters with ceiling height and with adjustments of the METER dial

Page 2 - 67-058-277 (Iss. 5)

PDFM362 PDFM361 can also be controlled by the infrared remote controller IR10. As well as allowing remote setting of times and light level the IR1

Modèles reliés PDFM361

Commentaires sur ces manuels

Pas de commentaire

Timeguard PDFM362 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Horloge Timeguard PDFM362. Timeguard PDFM362 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés PDFM361

Commentaires sur ces manuels

Produits connexes et manuels pour Horloge Timeguard PDFM362